Category Archives: Amateur Radio

Wyong Field day and three SOTA activations

The Wyong field day is a major hamfest held at Wyong every February, with equipment exhibition and sales, a flea market for used equipment sales, a seminar room and supported by food and refreshments.

I have visited this event every year of the last 10 and have usually looked at the new equipment, passed through the flea market, sometimes buying something unique and desirable (such as the 3 element 6m yagi I bought one year)  but mostly just catching up with friends who I often see only at this event.  Some I never hear on the radio these days but they turn up at Wyong in February.

Having decided in advance to activate several summits on the way to Wyong, Andrew VK1AD (ex VK1NAM) and I set out from Yass at about 9am and reached the parking area in the vicinity of VK2/SY-002 Riley’s mountain at about 12:30, having stopped for coffee on the Hume Highway.

Sign at the start of the walk up to Riley’s Mtn

The walk from the carpark to the summit was signposted as 2.6km each way or 5.2 km for the round trip.  The track through the forest was in good condition and the forest was green and healthy, with chirping birds the only sound breaking the peace apart from the noise of our boots on the gravel and dirt track.  After about 30-40 mins steady walk we found a sign pointing left labelled “Riley’s Lookout”.  Taking the side path we were soon standing high above the Nepean River enjoying the view of the forest and river.

Nepean river and Blue Mtns National Park

Considering where to set up our radio gear to activate this rather nice location, we decided to walk the 50m or so back to the main track and set up there, using the sign as a support for the antenna pole.  In no time we had the antenna up in the air, the radio connected to the antenna and power and the microphone and key paddle plugged in.

Equipment and operator at the lookout sign on Riley’s Mtn

We posted spots on SOTAWATCH  to be sure chasers and other activators looking out for S2S contacts knew we were on the air and where to find our signals.  A good session of contacts ensued with reasonable signals into Victoria, Queensland and South Australia, as well as some closer contacts in various parts of New South Wales.

One of the contacts made was with Marek OK1BIL/VK2 who was operating  at Mt Alexandra with Compton, VK2HRX.  We met Marek at Wyong the next day and had a good chat with him.

Leaving Riley’s mountain after about an hour of operation, we headed northwards to the Great Western Highway and then towards Sydney, onto the Newcastle freeway and eventually turned off the highway near Ourimba, to reach Mt Elliott VK2/HU-093.  Again this was a very pleasant and easy place to operate from, with picnic tables, expanses of grass inviting sevevral poles supporting antennas.  Here we used a 20m quarter wave vertical on one pole and a linked dipole on the other.  On 20m we made a few CW contacts into Europe and some into other parts of Australia.  Conditions were not good enough on 20m to make long distance SSB/voice contacts.

One of the picnic tables at Mt Elliott was pressed into service as an operating desk
Andrew VK1AD operating on 40m

Shortly before sundown we closed down and made our way to Wyong where we had booked accomodation for the night (two months earlier, or more).  We had a meal and some cool drinks at Panarotti’s at Tuggerah Westfield.

In the morning I woke early and decided to observe the International Space Station’s pass which was almost directly overhead.   I lost sight of it to the northeast when it was over New Caledonia according to the tracker.   It was brighter than most other things in the sky apart from the moon.

At the Field Day there was a good collection of second hand goods for sale in the flea market, some new items but it was strangely quiet in the corner where one of the larger traders usually is found.   At the VHF seminar, some discussion about the rules for VHF/UHF contests prompted me to make some unplanned comments about operating practices in these events, specifically about the practice of callinq CQ, making all contacts and listening all on 144.150, which many field and home stations appear to do.  A straw poll of those present revealed that while a number of people operated in that event, only a small number of them had made contacts into VK1, only 250km away from the Sydney area.  I suggested that this was due to being stuck on the calling frequency and it would help everyone to make more contacts, make more points in the contest and increase activity if they could move to other parts of the band during these events.  Let’s see whether a direct appeal to the operators has the desired effect.  I wish the contest rules did not specify a calling frequency.

We departed Wyong at about 12 noon and headed homeward. After a lunch break at Pheasants Nest we continued to the turnoff for Mt Wanganderry, VK2/IL-003.  Setting up there we were able to make contacts on 40m using SSB and CW, we did try 20m without any success.  This was a new summit for us both.

The antenna and shelter at Mt Wanganderry
The antenna and shelter at Mt Wanganderry
Using the sun shelter at Mt Wanganderry

RD contest 2015

The exchange in the RD contest is a signal report in standard RS(T) format, followed by a 3 digit number indicating the number of years the operator has been licenced.  This year it was 50 for me so I thought that was a good excuse to operate in the RD.

I decided to use CW only and use the IC703 at 5 watts output.  This put me into the QRP/CW category.

The bands were ok for east coast contacts on 40m and 80m.  I didn’t hear any VK6 on CW which was unusual.  I did hear one on 20m but conditions were poor there and I was unable to make any contacts.

Total contact count was 100 on the RD logger screen but 99 in the summary – perhaps I confused it at some point when I backed out a contact that didn’t get completed.

IMGP1677s IMGP1679s IMGP1681s IMGP1682s IMGP1683s

VHF/UHF field day at Mts Alexandra and Gibraltar, June 2015

This operation was intended to give me more contacts for the 6/10m challenge while qualifying as an entry in the VHF/UHF field day.

Unfortunately I did not pack the 3el beam for 2m and a third length of coaxial cable.  This limited my 2m antenna options and the range I could achieve.

Radio wise I was in a good position at the “Katoomba” Lookout on Mt Alexandra, just north of Mittagong, south west of Sydney. I could hear and work anyone others were working in the Sydney basin and also could work Geoff vk2ul in Yass and Gerard vk2io who was on various summits in the Blue Mts north of me.  One North Sydney station could be worked easily on 2m and 70cm but while I could hear him well on 6m, he was unable to hear me and gave the (SSB) contact away.

In a surprise Es contact on 6m I did work vk5kv who was s9 on peaks.

Another station called CQ frequently on 6m and was replied to by several others closer to him, but he appeared to receive only very strong signals. He called CQ many times on 6m but never seemed to understand something was wrong. I wondered whether his receiver was faulty or perhaps his antenna system had high losses.

After making about 20 contacts I moved to Mt Gibraltar. Another operator, VK2VOM,  had been working there but had generator problems and was closing down. I was on the air at Mt Gibraltar by 4:30 pm but by then all the other portable stations except for Gerard  vk2io had closed down. After spending 2 hours there and working Gerard on 6 and 2m and making very marginal contacts with Geoff vk2ul on 6 and 2, I was too cold to continue as it was around 2C and I decided to leave even though I had not made enough contacts to qualify the summit for SOTA purposes.

Very disappointed in the low level of activity for the VHF contest.

My gear was an ft817 at 5w running on a Lipo 3s and a LiFePO4 4s battery. At Mt Gibraltar I added a hl66v amplifier for 6m which should have raised my output power to about 30w. Antennas used were a wire dipole for 6m and a quarter wave vertical for 2m. Most of the 2m contacts were actually made using the 6m dipole.



The operating position using a picnic table kindly provided by council.  FT817 radio, iphone, ATU (not used), log book, morse paddle, boxes used to carry the bits in my backpack.  No car access here, so you carry the lot.

IMGP1586s6m dipole just visible (red wires) attached to squid pole.


ANZAC centenary special event station VK100ANZAC

The centenary of the ill fated landing at Gallipoli in 1915 was a well publicised event in Australia, with many special events occurring both in Australia and in Turkey.  ANZAC day commemorates a military disaster in 1915 in which thousands of Australian and New Zealand soldiers died attempting to invade Turkey but were repelled by the Turks at a great cost to both sides. Oddly enough the nature of the conflict has seemed to generate long lasting mutual respect on both sides.  

The amateur radio community participated in the event by running various special event operations. In Canberra it took the form of a broadcast at dawn featuring various dignitaries from the military and the Wireless Institute of Australia. 

A corresponding special event station was set up by the Turkish amateur radio association near Gallipoli.    

The Canberra Region Amateur Radio club  supported the WIA event by setting up a field station on Mt Ainslie directly above the Australian War Memorial.  After the broadcasts were completed the station went into general contact mode and was kept on the air until about 3pm when the antennas and equipment were packed away. A lot of interest was shown by the regulars on 40m and some who are not heard often.  

My interest in this event, apart from contributing to the clubs operation, was to provide SOTA operators with a contact with the special call sign from the SOTA summit. To be compliant with the SOTA rules I used my normal SOTA equipment powered by a LiFePO  battery. The 40m antenna was a wire dipole supported by a mast and a tree. 

After the main station was packed away in the afternoon I set up my usual SOTA station to continue making contacts as vk100anzac on 20m. 

Some photos here show my setup in the club tent on 40m in the morning.    The IC703 is using the 4200 maH battery on the nearest edge of the table.  The key being used in this pic is a Brown Bros BTL, 1965 vintage.  Photos by Min Sun, used with permission. 


VK1DA sends some code while Fred VK3DAC observes and listens to the message sent.   

The other HF operating positions are on the right.  Dale VK1DSH is seated at the right hand end of the table, Raoul VK1FIVE is standing on the far left.  Roger VK2ZRH is on the far right explaining an aspect of his 10 GHZ station which he used earlier in the day to make a contact with Dale VK1DSH.  I don’t have the name of the person standing next to Roger, I will add his name when I know it.  


The 20m operation was housed in a small dome tent and there wasn’t much light to take photos as it was almost dark when I set that up.  I took some photos by torch light and the camera was the iphone 5.  This was later in the operation when I was trying the 706 to see if the higher power made much difference. 



On 20m I made 43 contacts using the IC703.  I did have the IC706 available but I wasn’t sure the battery would last the distance if I used the higher current required by that radio.  I did call Mike 2E0YYY in the UK  using the IC706  on 50 and 100 watts just to see how well he heard its signal, well after the propagation faded somewhat.  He gave me a signal report about the same as how I was receiving him.  

Overall I thought national and international interest in the special event station was pretty good.  Thanks to all those who patiently waited for the traffic to clear and make their calls.  


John Moyle Memorial National Field Day contest March 2015

As in past years I operated in this event at Mt Ginini in two ways.  On VHF/UHF bands I used my standard equipment powered by a Honda EU20i generator, with 100w output on 2m/6m, 75w on 70cm and 10w on 23cm.  On HF bands I ran 10w from battery power, to be SOTA compliant.

I started the site setup at 5pm Friday night, setting up the tent and the HF antennas.  Two squid poles supported these antennas.  One was a linked dipole for the HF bands from 40 to 10m.  The other antenna was a quarter wave vertical with elevated radials for 20m.

HF dipole
HF dipole
The vertical antenna for 20m uses this junction box as the termination of the coaxial feedline, the vertical element above it and three radials each a quarter wave long attached to the binding posts on the sides of the plastic box. This is usually carried up to SOTA summits so needs to be light.


The VHF/UHF antennas were erected on Saturday morning.  Matt VK1MA and Glen VK1XX arrived to perform some maintenance work on the tower for the repeaters run by the Canberra Region Amateur Radio Club.  When I was ready to lift my antennas they were ready to help and fortunately I only needed to adjust the guy ropes.

VHF/UHF antennas being assembled prior to attaching feedlines
VHF/UHF antennas being assembled prior to attaching feedlines
VHF/UHF antennas being assembled prior to attaching feedlines
VHF/UHF antennas being assembled prior to attaching feedlines

On VHF the band conditions seemed ok, with the VK3RGL beacons on 144.530 and 432.530 were both received with reasonable signals.  Towards Sydney the beacons on 144.420 and 432.420 were weak but detectable.  Propagation in the north east direction (Sydney and up the NSW coastline roughly) remained ordinary for the weekend.

By the late afternoon, I had logged a small number of contacts on 40m and on the VHF/UHF bands.  There were a few other field stations, the most prominent on VHF being VK3ER and VK3KQ and I could work both on 6m/2m/70cm without much trouble.  The 23cm signals were detectable but only workable on peaks of the fading always present on that band.

In the hour before sunset I was working some 20m CW contacts as a SOTA portable, conditions did not seem too good on 20m towards Europe but I made a handful of contacts with Europeans and some Australians.  The planned ssb activations in Europe were basically inaudible, though with some imagination I could hear faint voices and stations calling them.  When you cannot really hear the chasers you know it will be hard to work the activators.

Returning to the VHF/UHF bands I had some good contacts into the area west of Melbourne, then heard VK5SR in the Mount Gambier area with a big signal.  Contacts with VK5SR were made on 144 and 432, but no signals heard on 1296.  Contacts were made at much increased signal levels with VK3KQ and VK3ER on 1296 as well as the three lower bands.  VK5RX was worked also on 144, a much more westerly contact in the PF95 grid.

I made a recording of an hour of the vhfuhf contacts on Saturday evening and it is published on dropbox.  The link is and when listening to the signals from vk5sr on 144 and 432, remember that those signals are from a station 777 km away. VK3KQ was at a distance of about 500 km. 

During the recording you will hear a contact with vk3er on 1296 where they were so strong with their dish on my direction that I thought they were a local. Then I could hear vk3er at a distance of 460 odd km on 1296 even while they were beaming to Mt Gambier with their their dish 120 degrees off my direction. Conditions were unusually good! Following the contacts with vk3er on 1296 and 50 mhz there was a contact made on 1296 with vk3kq after several tries using 432 for liaison. There was an unsuccessful attempt, another set of dits used as a beacon, then finally a successful contact on ssb.  

By about 10pm the wind had increased in strength and it seemed unlikely there would be any new contacts made. I didn’t plan to operate after midnight to make contacts in the next 3 hour period so I closed down for the night, lowering both antenna masts so as to protect the antennas from the wind.  Having seen stakes almost completely ripped out of the rocky ground by gusty winds in past events, I didn’t want to risk damage to the antennas, the tent or the operator!

I woke at about 5am and was very cold, having packed the wrong sleeping bag.  It was about 4C that morning which was an improvement over the 2C of Saturday morning, however I warmed up in the car for 20 mins before raising the antennas and getting the station back on the air.  A few field stations were ready for contacts prior to 6am but despite trying to work them all before 6 on all bands, a few contacts were missed.  Due to the 3 hour time blocks used in this contest it is possible to make contacts in each 3 hour time block, at any time.  After the initial flurry of contacts with VK3ER VK3KQ and VK2WG it was time to check the beacons especially looking for VK5 beacons given the good conditions into VK5 the night before.  Some of the VK3 beacons were audible, the VK3RGL were good signals on 144 and 432 but the Mt Gambier VK5RSE beacon was not heard.  However the VK5VF beacon close to Adelaide was a good signal so I started making CQ calls beaming to Adelaide on 144.150.  During the next few hours several VK5 contacts were made on 144 and 432, with a marginal contact made on 1296 with VK5PJ.  Jeff VK5GF joined in the fun and his signal remained good for  several hours.  The VK5 signals were still good after 9AM so we were able to make several contacts for the field day log at these excellent signal levels.

Near Wagga the VK2WG club station was also making contacts into VK5 on 144 and some on 432, though signal levels were markedly lower than those received at Mt Ginini’s altitude of just over  1700m.  John VK2YW was operating the VHF station there and he has since commented that he wants to get onto 1296 after hearing of the contacts made there.

Operating desk, transceivers, microphones, morse paddles, power supplies and rotator controls.

IMGP1472 IMGP1475 IMGP1477

Antennas for 144, 432 and 1296 MHz on the foreground mast, with the 3 element beam for 50 MHz on the mast to the rear.
Antennas for 144, 432 and 1296 MHz on the foreground mast, with the 3 element beam for 50 MHz on the mast to the rear.

I think this event was my most successful field day from a VHF/UHF perspective.  The conditions on 144 and 432 were above their usual level but the results on 1296 were my best ever.   The vhf and uhf bands are a lot of fun in these great conditions.

Four Snowy Mt summits in summer 2015


As I had some time off work in January I planned a SOTA expedition to activate some summits in the Snowy Mountains region, where there are plenty of high value summits to choose from.  I planned to activate several summits on the first day and one major trip on the next day.

The first summit activated was the unnamed VK2/SM-053 which is east of the Thredbo road.  Others have described it and its location, it is easy enough to find and can be driven up, though the top section of the road has been damaged by roadworks and recent heavy rain.   I parked my car on the road near the top and walked to a suitable point where I could see a good location for my radio and a nearby stump that the mast could be attached to.  The multiband dipole was soon set up and I was able to qualify the summit within a few minutes of getting on air, on both SSB and CW on 40m.   Nothing was heard or worked on 20m and that band sounded quite dead.  20 contacts made on 40m.

VK2/SM-014 The Cascades

Driving towards Thredbo afterwards, a thunderstorm passed overhead with heavy rain and I wondered how the weather would be when I reached the next parking spot.  The storm passed and soon even the rain stopped, so by the time I reached the parking area at Dead Horse Gap, about 10km past Thredbo, the sky was clear of rain clouds and I was able to get my bike out of the car and get moving towards the Cascades.  This summit is to the south of the Thredbo river, but the path along the north side of the river takes you the first 2km of the trip.  Then you cross the river either on the steel bridge or via a road crossing intended for forest maintenance vehicles.  I decided against riding through the water, it was about 150 to 200mm deep at that point but flowing quite quickly.   After crossing the river, you follow the track up towards the hill.  I left my bike near the river and walked the next 2km without it.  It would have made the return trip much faster if I had pushed the bike up to a higher point.

Having reached the highest point on the fire trail/maintenance track at about 2km past the river crossing, it was easy to walk upwards towards the summit through the bushland.  Taking care to look out for unfriendly wildlife, I passed the first set of (huge) rocks and my GPS was already indicating that I had entered the top 20m contour so I had to be in the activation zone then.  I found a suitable rock to set up my gear on, only later noticing that there was a huge dead eucalyptus tree nearby.  Fortunately nothing unpleasant happened but I should have chosen a safer place to sit.  Those old trees are called “widow-makers” for good reason.

After making the first dozen contacts on 40m ssb, I moved to CW and made more contacts, as part of my aim to qualify each summit I activate on ssb and CW.  Signals incoming were ok but the reports I was receiving were well down on the usual level.  After moving back to the ssb mode I made more contacts and while talking with Matt VK1MA I told him my antenna seemed to have a fault, and while saying that my gaze went up the pole to where the coaxial cable feedline connected to the antenna wires.  I could see one of the antenna wires sticking out into free space and knew I had found the problem.  I pulled the mast down, reattached the wire to its binding post and raised the mast again.  Matt then reported my signal level had raised from s6 to s9.  So I owe all previous contacts my apologies for the low signal, all due to not checking the antenna properly.  The same problem was probably affecting signal levels on the previous summit too.

After moving to 20m I made a good contact with Peter VK4JD, who was much stronger on 20m than he had been on 40.  Then a contact with John VK6NU and another with John on CW on 14062.  I heard a few European stations calling me on CW but none of them responded to my replies, so were apparently calling blind, on the basis of the Sotawatch spot.  No contacts occurred from these blind calls.  I wonder how often they work.

By then it was just after 7pm local time and I needed to pack up and leave, to avoid making too much of the return trip in darkness.  It took about 45mins to walk back to my bike, so perhaps it was more than 2km.  From that point it was a fairly quick ride back to the car, passing a few brumbies on the way.

I arrived back at Jindabyne just after 9pm.

 VK2/SM-001 Mt Kosciuszko

I arrived at Charlotte Pass at about 9:45 am, somewhat later than planned.  With the squid pole attached to the crossbar of my bike, I rode the first 4.5km then pushed the bike up the steeper sections past Seaman’s Hut and up to Rawson’s Gap where there are public toilets and bike racks.  Bikes are not permitted past that point.

It took me about 2 hours to cover the 7.6km from CP to Rawson’s Gap.   I had to walk about 4km of this, slowly, as parts of it were too steep for my bike.  I may have been able to ride more of this section with a lower geared bike. Mine is a general purpose road bike with 21 gears and no spring suspension. The gears and tyres are not really suitable for this kind of “road”.

From Rawson’s Gap to the top of Kosciuszko is about 1.4 km, climbing about 150m vertically over that distance.  Rawson’s is a common point where the track from Charlotte Pass and the track from the top of the Thredbo chairlift meet.  After a break there to lock my bike, detach the squid pole and get ready to walk, I set off up the final section of the ascent.

My first contact was made at 0218, the last was made at 0351.  I used 7mhz for nearly all contacts.  The 20m band was sounding almost dead. the only contact made on 20m was with VK4JD.  I also made a brief contact with VK2KVP in Murrumbateman via the VK1RGI repeater on Mt Ginini.  Other repeaters were heard while the 2m fm radio was scanning around all the memories.  John VK2YW was heard chatting to others in the Wagga area, the Albury repeater was heard a few times.

After leaving the summit I noticed the clouds to the north looked particularly dark and I knew there would be some rain on the trip back to Charlotte Pass.  I retrieved a jacket from my backpack as part of my preparations for the return trip by bike.

As it was all downhill for about 4km past Seaman’s Hut to the Snowy River bridge, then only a short section with a slight uphill slope, followed by about 4km of a gentle downhill slope, the return journey to CP took only about 30 mins.   A shower of rain with wind lasted for about half of that journey.  Back at the car,  I chatted with a friendly couple who had also just returned from Kosciuszko, one of them riding and the other running.  They took less than 3 hours for their entire return journey, but they didn’t have a radio to operate on the mountain!

It occurred to me later that as Thredbo is at about 1400m ASL and Kosciuszko is 2229, the vertical distance is 830m or so.  This is not much more than the vertical distance we climb for Mt Tennent in south Canberra, though it is lower altitudes (from about 620 to 1384, or 764m). For someone taking the chairlift at Thredbo, the distance required is reduced by about 600m, making the climb up Mt Tennent more difficult than the trip from Thredbo to Kosciuszko.

VK2/SM-068 The Peak

Over a coffee in Cooma on the morning of 22 Jan, I browsed the summit list and decided to check with Rod VK2TWR how to find this one.  He provided the directions and said my car would easily drive up the hill.

Located about half way between Cooma and Nimmitabel, this summit is reached via about 10km of dirt road, the last 300m being fairly rutted and rough, with many large thistles covering the track and adjacent land.  The turnoff is marked with a sign marked “The Peak” at 22 km from Cooma just after a sign indicating 90km to Bega.  There is a Telstra building and tower on the summit.

I parked near the building compound and climbed the final bit up to the trig point.  Attached the pole to the trig and operated on 40m ssb and cw, 20m produced contacts with VK5IS, VK4JD and VK5WG.  I didn’t qualify this on cw or on 20m, making contacts with only 3 unique callsigns on cw and only 3 contacts on 20m.

[AFG_gallery id=’19’]

SOTA feeding frenzy 1st Jan 2015

Alerts published on Sotawatch late in December 2014 had given some indication of how many activators were planning to visit summits on the morning of 1st January 2015 and it looked like being a busy day.

To make best use of this opportunity, Andrew Moseley VK1NAM and I decided on Mt Tumanang, coded VK2/SM-049, south east of Canberra and south of Captains Flat. Neither of us had activated this summit before today so we were hoping to gain not only the S2S points from working other activators from this summit, but two sets of activator points, being 2014 in UTC prior to 11AM and 2015 afterwards.

The trip was planned and marked on Andrew’s GPS so we would have some knowledge of distances and some warning of major turns needed within the forest. I left home at about 6:15 to collect Andrew at 7:30. About an hour to the Cowangerong fire trail turnoff on Captains Flat Rd and in another hour we were parked on the fire trail at the foot of the ridge extending north west from the summit. The walk up to the summit was in typical southeastern Australian eucalyptus forest. The walk only took 20 minutes or so. We set up just to the east of the trig station and decided to set up one rig on 40m and the other on 20m. In addition we used the 40m antenna on 6m.

IMGP1293 IMGP1294 IMGP1295 IMGP1296

After making several surprising contacts on 6m, one to Gerard VK2IO at Mt Eliot near Gosford NSW, and another to Paul VK1ATP at Booroomba Rocks VK1/AC-026, we ventured onto the 40m band to see how conditions were.

Prior to 0000 UTC each activator was keen to score as many s2s points as possible, so many chasers probably missed out on contacts during this period. Each cq call was greeted with several S2S responses and priority was given to S2S, as this is the day when activators are out there to fish for S2S and are keen to make best use of the time.

For the next two hours it was frantic on the 40m band all the way up to 7170 where we found it was possible to provide contacts for chasers, but only for a few contacts at a time until other activators found us and requested priority.

IMGP1297 IMGP1298 IMGP1299 IMGP1300 IMGP1301

Eventually we decided to move on to Mt Cowangerong, which we had passed on the way to Mt Tumanang. It took about an hour of quite slow travelling with 4WD-low engaged for some of the time. The erosion control humps on the road vary in size but some are big enough that you don’t really know what’s on the other side.

The FJ Cruiser shown on top of an erosion barrier



The photo does not really show the size of the hump. See similar photos in the account by Mark VK1EM.  The FJ cruiser has plenty of clearance and is probably a little shorter than Mark’s Pajero so the angles of these erosion barriers did not pose any problem for us.

At Mt Cowangerong it was somewhat more subdued, though we still earned and handed out many S2S and chaser points.

Andrew VK1NAM relaxing into some contacts at Mt Cowangerong


VK1DA at Mt Cowangerong

Overall a great day for some SOTA operation on HF, some surprise contacts on 6m and fairly low conditions on 20m and above. While we did hear one VK6 station, signal levels were very low and we had no luck in being heard despite a sked lined up by VK5PAS.

I know some operators are not keen on these big activity days. But they create a big splash on an otherwise quiet band and give many people a chance to earn some new points, new unique summits worked and a boost to the S2S tally. I think my own S2S tally increased by over 270. Given that i was hoping to reach 1000 by the end of 2014 and was very pleased to do so (something that took almost 2 years to achieve)  I was stunned to see my S2S score rise by 27% on one day.

We wanted each of us to be able to make all the s2s contacts possible, so we needed the equipment to be closely located. That meant some interference between the two radios, both emitting wide band hash whenever transmitting. We will need to consider alternative layouts if we want to operate simultaneously in future. The obvious method is to separate the equipment widely and that would normally be the case with each of us using different bands. On other sites we have been able to operate on different bands with a separation of 20-30m and we know that other joint expeditions have managed to even operate on the opposite ends of the same band, one on ssb and one on cw.

Thanks again to Andrew VK1NAM for his guidance, navigation and good humour during the day.